Power Connection; Setting The Clock; Radio Operation - Hello Kitty KT2052P User Manual

Plug the AC cord of the radio into a 120V~ 60Hz AC power outlet socket.
When you connect the clock radio to your AC outlet for the first time and switch ON the
power, the time digits will flash on the display. The flashing will stop after you set the
time.
1. When the radio is off, hold the TIME button 2 seconds. The HOUR digits will flash.
2. Press the UP or DOWN button to set the correct Hour. Press the TIME button, then
the MINUTE digits will flash.
3. Press the UP or DOWN button to set the correct Minute. Press the TIME button
again to confirm.
PM
ALARM1
NOTE: Be sure to observe the PM indicator to make sure that the time is set correctly
for AM or PM. If the PM indicator is 'Off', the time displayed is "AM". If the PM indicator
is 'On', the time displayed is "PM ".
The time setting will be automatically terminated after idling for a few seconds.
Turn on or Turn off Radio
Press [RADIO FM/AM] button once to turn on FM radio. Press [RADIO FM/AM] button
one more time to change to AM band. Hold [RADIO FM/AM] button for two seconds to
turn off the Radio.
Select the station
The display shows the radio frequency then the current time. Press [- TUNING +] button
to select the desired station. When you hold [- TUNING +] button for 2 seconds, the
radio will search the nearest station.
Volume control
Press [- VOLUME +] button to adjust the volume to your choice of 16 levels.
Auto Scan
Hold [AUTO SCAN] button 2 seconds, then the unit will search and set 10 stations.
Press [AUTO SCAN] button and then UP or DOWN button to select the preset stations
from P01 to P10.

POWER CONNECTION

SETTING THE CLOCK

RADIO OPERATION

6
SLEEP
ALARM2