2
Attach the Attachment parts for Wall-Mount Bracket. Check the Attachment parts by
referring to "1" of the Wall-Mount Bracket Installation Guide.
Note
• Be sure to fasten the Wall-Mount Attachment when attaching them to the TV.
Use only a flat head screwdriver to install the Wall-Mount Attachment. Use of another tool might result in over
torqueing the Wall-Mount Attachment and damaging the TV.
• If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}.
• Be sure to store the unused parts in a safe place for future use. Retain this manual for future reference.
Standard mounting
Slim mounting (KD-55X9300C), Super Slim (60) mounting (KD-65X9300C)
Note
• You cannot use some of the terminals on the rear of the TV when using this mounting style.
Connect the Analogue Extension Cable if you need to use the
22
GB
Wall-Mount Attachment
(supplied with the TV)
Belt
Spacer (60 mm)
Pulley
Screw (+PSW 6 x 20)
Screw (+PSW 6 x 50)
/
VIDEO IN 1 jack.