Conversion Circuitry; Attaching An Ikelite Strobe Arm To The Housing Handle - Ikelite 6182.78 Instruction Manual

Ikelite Housing Conversion Circuitry
This housing has Ikelite designed and patented Conversion Circuitry
built into the housing back. The Conversion Circuitry provides real Nikon
TTL flash exposure when used with Ikelite DS series Strobes.
Once a DS-series strobe is attached to the camera housing, the
conversion circuitry is automatically powered after the strobe is turned
on. Once attached, turn the strobe on first before turning on the camera.

Attaching an Ikelite Strobe Arm to the Housing Handle

To attach an Ikelite Arm to your
Housing Handle, depress the
spring-loaded Handle Push
Button until it stops. Gently slide
the pronged end of the Ikelite
Arm into the hole in the top of
the Handle as shown.
When the Ikelite Arm is properly
seated, the Handle Push Button
will return to its starting position.
14
Ikelite Arm
Housing Handle
Handle Push
Button