Dymo LabelWriter 300 series User Manual page 3

The Star TSP series set up instructions cover the TSP-700 receipt printer.
Place the receipt roll inside your Star TSP-700 receipt printer and feed a small section of the
receiptroll out of the printer. Close the printer lid.
Configuring the printer
Please ensure you have installed the Star TSP printer driver before following the
configuration steps below...
Ÿ
Open Devices and Printers from the Start Menu,
Ÿ
Right click the Star TSP printer icon,
Ÿ
On the pop-up menu, click Printing Preferences
Step 1 - click the "Advanced..." button
THERMAL TICKET PRINT SERVER
Star TSP series printer set up
3
Step 2
Ÿ
Set Paper Size to "80mm x Receipt",
Ÿ
Set Print quality to "203 x 406 dots per inch",
Ÿ
Click "OK".
Step 3
Ÿ
Open Devices and Printers from the Start Menu,
Ÿ
Right click the Star TSP printer icon,
Ÿ
On the pop-up menu, click Printer Properties,
Ÿ
Click the "Device Settings" tab,
Ÿ
Set Friction to "80mm x Receipt",
Ÿ
Set Page Cut Type to "Partial Cut",
Ÿ
Set Document Cut Type to "Full Cut",
Ÿ
Set Print Speed to "Middle" for best quality results,
Ÿ
Set Print Density to "Standard",
Ÿ
Click "OK".