WARNING!
Do not plug the machine into the wall or try to operate until the band saw is completely assembled, wired, all belts are aligned
and tightened, and the blade is tensioned and tracking properly.
Carefully unpack the contents of the box and check that all items in Fig.2 are not missing. Do not discard any packing material until the band
saw is fully assembled and operational.
The blade, blade guard and upper and lower guide blocks assemblies may or may not be assembled on the band saw main frame and may
be loose in the box.
UNPACKING
CONTENTS OF BOX
1. Band saw main frame
2. Pulley (2) and "V" belt
3. Miter gauge
4. Trunnion bracket
5. Table
6. Hardware bag
7. Motor
1
2
3
4
5
7
6
FIGURE 2
8. Dust shoot
9. Belt cover
10. Stand top
11. Legs
12. Stiffner (long)
13. Stiffner (short)
14. Support plate
14
9
8
10
11
12
13