Wireless Display - Toshiba R30-C User Manual

Wireless display

Some models support Intel Wireless Display (Intel WiDi), a wireless
technology which utilizes Wi-Fi to allow the computer to be wirelessly
connected to external displays including TVs as extended screens. With
wireless display, documents, streamed/local media contents or other online
contents can be shared wirelessly with others.
To use wireless display, either one of the following devices is required:
Click Start -> All Programs -> Intel(R) WiDi. Intel WiDi application will
launch and you are ready to start the connection.
To learn more details on how to complete the connection, please refer to
the application help.
Some copy protected media contents might not play on the external
displays via Intel WiDi.
Changing the external playback settings
After one or more external displays are connected, the operating system
can automatically detect, identify, and set up the display settings.
You can also manually manage how the external displays work and change
the display settings by pressing P while holding down the Windows (
key. If you disconnect the external display before you turn off the
computer's power, be sure to switch to the internal display.
When you change the display output device, the audio playback device
might not switch automatically. In this case, in order to set the playback
device to the same device as the display output device, adjust the audio
playback device manually by the following steps:
1.
2.
3.
4.
5.
User's Manual
A compatible external display with built-in support for wireless display.
An external display with HDMI port and a wireless display adaptor.
The wireless display adaptor is a device that connects to the external
display via HDMI port and can receive Wi-Fi signals from your
computer.
Click Start -> Control Panel -> Hardware and Sound -> Sound.
In the Playback tab, select the playback device which you want to
switch to.
To use the internal speakers on your computer, select Speakers. To
use the television or the external monitor that you have connected to
the computer, select a different playback device.
Click the Set Default button.
Click OK to close the Sound dialog.
)
4-50