Miele KFN 12823 SD Operating And Installation Instructions page 56

Reversing the door hinging
^ Slide the bearing pin i through the
middle hinge plate k and into the
lower door. The pivot on the bearing
pin rests in the notch on the hinge
plate.
^ Place the upper door onto the
bearing pin i at the middle of the
appliance.
^ Close the upper door.
^ Position the hinge plate c on the
opposite side and affix it using the
screws d.
You may have to pre-punch the
necessary screw holes or use a
battery-powered screwdriver.
56
^ Switch the positions of the covers a
and b.
^ Align the door with the appliance
housing using the slotted holes in the
lower hinge plate. Then firmly tighten
the screws.