Function: Remove Bonding Fig 3.1.1F - Rorke Data Galaxy LX5 Series Configuration And System Integration Manual

G A L A X Y N A S L X 5 C O N F I G U R A T I O N A N D S Y S T E M I N T E G R A T I O N G U I D E
Figure 3.1.1f
Primary: A string (eth0, eth2, etc) specifying which slave is the primary device. The specified device
will always be the active slave while it is available. Only when the primary is off-line will alternate
devices be used. This is useful when one slave is preferred over another, e.g., when one slave has
higher throughput than another. The primary option is only valid for active-backup mode.
Interface: Network interface name.
State: Shows if NIC is connected.

Function: Remove bonding fig 3.1.1f

Here you can remove a bonding interface.
44 Section 3 Menu Functions