Function: Nfs Share Access Fig 3.2.3E - Rorke Data Galaxy LX5 Series Configuration And System Integration Manual

G A L A X Y N A S L X 5 C O N F I G U R A T I O N
group. Please note this means they will lose their rights to objects for which the forced user and group
does not have similar rights to.
This option applies only to the SMB protocol.

Function: NFS share access fig 3.2.3e

Using this function you activate access to a particular share via NFS. In order to activate NFS on the
Galaxy NAS LX5, you must enable usage of NFS in the menu "SETUP"
NFS settings.
Figure 3.2.3e
In order to mount this share via NFS, please use following syntax:
mount -t nfs IP_addr:/share_name /local_mount_point
In order to mount a share in 'synchronous mode' please use:
mount -t nfs IP_addr:/ share_name /local_mount_point -o sync
In order to mount a share in ' asynchronous mode' please use:
mount -t nfs IP_addr:/share_name /local_mount_point -o async
When using synchronous mode, data is not stored in a cache buffer, but transferred at once. In
asynchronous mode the data is first stored in a cache buffer and then transferred.
You can use the following NFS option fields:
Allow access IP
131
A N D S Y S T E M I N T E G R A T I O N G U I D E

"NAS settings" in Function
Section 3 Menu Functions