Specifications - Sony DVP-NS15 Service Manual

Specifications

System General
Laser: Semiconductor laser Power requirements:
Signal format system: PAL/NTSC (See
page 16 to switch)
Audio characteristics
Frequency response: DVD VIDEO (PCM Power consumption: 9 W
48 kHz): 2 Hz to 22 kHz (±0.5 dB)/ Dimensions (approx.):
CD: 2 Hz to 20 kHz (±0.5 dB)
Signal-to-noise ratio (S/N ratio): 115 dB
(LINE OUT L/R (AUDIO) jacks only) Mass (approx.): 1.74 kg
Operating temperature: 5 ° C to 35 ° C
Harmonic distortion: 0.01 %
Dynamic range: DVD VIDEO: 85 dB/ Operating humidity: 25 % to 80 %
CD: 85 dB
Supplied accessories
Wow and flutter: Less than detected value
(±0.001% W PEAK) See page 14.
Outputs
Specifications and design are subject to
(Jack name: Jack type/Output level/Load change without notice.
impedance)
E
LINE OUT (AUDIO): Phono jack/2 Vrms/ NERGY
10 kilohms As an
DIGITAL OUT (OPTICAL): Optical Corporation has determined that this product
output jack/–18 dBm (wave length meets the
660 nm) energy efficiency.
DIGITAL OUT (COAXIAL): Phono jack/
0.5 Vp-p/75 ohms
COMPONENT VIDEO OUT (Y, P /C ,
B B
P /C ): Phono jack/Y: 1.0 Vp-p, P /C ,
R R B B
P / C : 0.7 Vp-p/75 ohms
R R
LINE OUT (VIDEO): Phono jack/1.0 Vp-p/
75 ohms
S VIDEO OUT: 4-pin mini DIN/
Y: 1.0 Vp-p, C: 0.3 Vp-p (PAL),
0.286 Vp-p (NTSC)/75 ohms
Taiwan model: 110 V AC, 60 Hz
Model for other areas: 110 – 240 V AC,
50/60 Hz
See page 2 for further information.
430 × 43 × 208.8 mm (width/height/
depth) incl. projecting parts
S R
TAR is a U.S. registered mark.
E S R
NERGY TAR Partner, Sony
E S R
NERGY TAR guidelines for
67
DVP-NS15/NS51P/NS43P/NS53P/K56P
1-17E 1-17