Appendix
Troubleshooting
IN USE light
does not go
on.
The IN USE
light is flashing
slowly.
Screen is
blank.
•
Make sure four new AA batteries have been
installed properly.
•
Make sure that all telephone on the same
line are hung up.
•
Inspect the telephone line cord connections
at the wall jack.
•
Make sure the coiled handset cord is properly
and securely connected to the handset and
the telephone base.
•
Make sure four new AA batteries are installed
properly (see Battery installation on page 6).
•
You must subscribe to caller ID service from
your local telephone service provider to see
call information on the screen (see About
caller ID on page 25).
32