Caller ID operation
Copying a call log entry into memory
When you are reviewing call log entries, you can copy the
displayed telephone number to a one-touch or two-touch
memory location.
1.
Lift the handset.
2.
Press
or
entry.
3.
Press PROG on the handset.
4.
Press any one-touch memory location (M1,
M2, or M3) where you want the number to be
stored.
- OR -
Press MEMORY, then press the dial pad key (0 through 9) to
select the desired two-touch memory location.
NOTES:
Press CLEAR on the back of the handset when you have finished storing a
•
number in the memory to exit programming.
•
If you wait longer than 10 seconds to delete or copy the entry, the procedure
will time-out and you have to begin again.
•
If there is no battery power for more than 10 minutes, the call log information
will be lost.
to scroll to your desired
30
10 : 03
12/01
AM
CALL#
NEW
REP
800-222-3111
CHARLIE JOHNSON
01