Additional Service Procedures; Installing The Service Software; Connecting To The Service Software - Kodak EasyShare P850 Service Manual

Section 6: Additional Service Procedures

Installing the SERVICE SOFTWARE

[1] Which version of the Microsoft Windows OPERATING SYSTEM are you using?
Windows 98, ME, 2000
a. Install the Kodak EasyShare SOFTWARE.
b. Advance to Step
[2] Which version of the Kodak EasyShare SOFTWARE are you using?
a. Install the Kodak EasyShare SOFTWARE.
b. Continue with Step
[3] From the Kodak Partner Site, make a copy of the .zip file of the "Software and Firmware" for the CAMERA.
[4] Decompress 3 files from the .zip file.
• "DscCalDi.exe"
• "camapi32.dll"
• "PTPApi32.dll"
[5] Make a folder on your HARD DRIVE for the software.
[6] Place the 3 files into the folder.

Connecting to the SERVICE SOFTWARE

[1] Connect to the SERVICE SOFTWARE.
To connect without the CAMERA DOCK
1. Connect:
• USB CABLE between the CAMERA
and the computer
• 5 V AC ADAPTER to the CAMERA
2. Energize the CAMERA.
[2] Check:
• "Transfer" window displays
• green LED at the "ON" SWITCH of the CAMERA illuminates
SM7648-1 – 11NOV05
3.
Version 4
3.
Continue with Step
a. Select the "Custom" installation.
b. Load only the connection DRIVERS for the
CAMERA.
c. Continue with
To connect with the CAMERA DOCK
1. Connect:
• USB CABLE between the CAMERA DOCK and the
computer
• 5 V AC ADAPTER to the CAMERA DOCK
2. Place the CAMERA on the CAMERA DOCK.
3. Energize the CAMERA.
4. Press the TRANSFER BUTTON on the CAMERA DOCK.

Additional Service Procedures

Windows XP
2.
Version 5
Step 3.
75