Inserting Bobbin - Janome 639X Instruction Manual

Janome 639X Instruction Manual
1
2
1
3
4
www.toews.com

• Inserting bobbin

Place a bobbin in the bobbin case, making
1
sure the thread feeds clockwise from the
bobbin.
Draw the thread through the slot of the case.
2
Continue to draw the thread under the
3
tension spring and through the opening.
Pull out about 4˝ (10 cm) of thread.
Tension spring
1
Holding the latch open, position the bobbin
4
case into the shuttle, and then release the
latch.
The case should lock into the place when the
latch is released.
14
639X Owners Manual/ User Guide