Your Account - Optus DGN2200 Easy Manual

GET THE
WIFI GOING
1
Locate the WiFi settings on your computer or other device.
These will vary depending on the gadget you're connecting to. Give
us a shout on 1300 739 407 if you're having trouble finding them.
2
Enter the WiFi Network Name (SSID) and Password that's on
your WiFi card and voila, you're good to go!
Heads-up: if you choose to customise these settings, your details
will be different to what is printed on your WiFi card. A factory
reset will reverse any settings you've customised, e.g. it will
change back to the WiFi Network Name and Password printed
on the WiFi card we send you.
MANAGING

YOUR ACCOUNT

NOW THAT YOU'VE CONNECTED YOUR WIFI ADSL2+ MODEM, YOU CAN GET ON
WITH SETTING UP ANY OTHER FEATURES YOU MIGHT NEED.
CHANGING YOUR WIFI ADSL2+ MODEM PASSWORD
If you wish to change your WiFi ADSL2+ Modem password, please follow the steps below:
1. Open your web browser and change the address to http://192.168.0.1
2. Enter the default username and password as follows:
Default Username: admin
Default Password: password
3. From the menu on the top click Administration and then
select the management tab.
4. To change the password, type a new password and retype it in the Re-Enter New
Password box to confirm it. Then click Save settings to have the password changed.
5. Write down your new password and keep it safe. You may want to write it down with
the Settings Summary page if you printed it earlier.
Note: You will need to use this new password to access any of your WiFi ADSL2+ Modem's
advanced features or to reconfigure your service. If you forget this password you can reset
your WiFi ADSL2+ Modem by pressing and holding the reset button for five seconds. This
will also delete any other customised settings you have set.
YOUR ACCOUNT
For information on managing your Optus DSL go to:
optus.com.au/customerhelp
7
Keep me handy
your user information for wireless
Network name: (SSID):
Network Key: