Let's Get Started - Optus DGN2200 Easy Manual

LET'S GET STARTED

CHECK THESE
STEP 1
THINGS FIRST
Please install your modem after your Optus service activation
date and ensure you have the following items before installation:
• Your Welcome letter with your username and password
• Filter (x2)
• Grey telephone cable
• Netgear ADSL WiFi Modem Router
• Yellow Ethernet cable
• Modem power cable
CONNECT THE
STEP 2
FILTERS AND
TELEPHONE
1 To install the filter connect the side labelled Wall Socket to
2 If you have a different wall socket (600 series as pictured)
3 Remove the sticker covering the rear ports.
4 Connect the grey telephone cable to the filter port labelled
5 Connect your telephone to the port on the filter labelled Phone.
4
the telephone wall socket.
you'll need to use an adaptor (605 to RJ11). These can be
purchased from any electronics store.
Modem and the grey port on the modem.
600 SERIES SOCKET
TIP:
If you have a back-to-base alarm, ensure
you have a central filter installed.
TIP:
To add additional telephone devices that
share the same telephone number as
your Optus DSL Broadband service
(for example: telephones, fax machines,
dial-up modems, answering machines
and some digital pay TV equipment),
you'll need to use an additional filter
and install them as described for the
telephone above.
WALL
SOCKET
MODEM PHONE