Summary of Contents for Optus DGN2200
- Page 1 IN THIS GUIDE YOU WILL LEARN HOW TO GET YOUR ROUTER GOING IN NO TIME THE INCREDIBLY EASY GUIDE TO SETTING UP YOUR DGN2200 WIFI MODEM ROUTER...
- Page 2 HAVE THESE BITS AND BOBS HANDY The Netgear WiFi ADSL Modem Router supplied by Optus has been preconfigured by Netgear at the factory with unique WiFi security settings to simplify your installation. These settings are printed on the underside of the Netgear WiFi ADSL Modem Router and on the handy WiFi information card included in the box.
-
Page 3: The Front Panel
OFF, no USB device is connected 4. DSL SOLID GREEN, the ADSL port is synchronized with your ISP’s DSL Access Multiplexer (DSLAM) BLINKING GREEN, the ADSL is synchronizing with Optus OFF, no link is detected on the ADSL port 5. INTERNET SOLID GREEN, the wireless modem router is connected to the internet. -
Page 4: The Back Panel
THE BACK PANEL The back panel of the wireless modem router contains a number of port connections. The ports are colour-coded to distinguish your internet port from the other four ports that connect to the wired computer(s) on your LAN. Wireless antenna USB port Four local Ethernet RJ-45 LAN ports for connecting the router to the local... -
Page 5: Let's Get Started
LET’S GET STARTED CHECK THESE STEP 1 THINGS FIRST Please install your modem after your Optus service activation TIP: date and ensure you have the following items before installation: If you have a back-to-base alarm, ensure you have a central filter installed. - Page 6 CONNECT THE STEP 3 MODEM TO YOUR COMPUTER 1 Connect the yellow Ethernet cable to a yellow port on TIP: your modem. It is recommended you connect via Ethernet first before setting up your 2 Connect the other end of the yellow Ethernet cable to the WiFi connection.
-
Page 7: Your Settings
1 Open your internet browser and ignore any error messages TIP: that may appear (e.g. Internet Explorer, Firefox, or Safari) and If it’s the first time you are using Optus type 10.1.1.1 in the address field of the browser. Broadband you will be directed to ServiceNet to activate the service. -
Page 8: Your Account
If you forget this password you can reset your WiFi ADSL2+ Modem by pressing and holding the reset button for five seconds. This will also delete any other customised settings you have set. YOUR ACCOUNT For information on managing your Optus DSL go to: optus.com.au/customerhelp... - Page 9 If you’re still having trouble give us a shout on 1300 739 407. Q. I’ve just received my shiny new modem. Do I need to call Optus first? A. No. Just read the instructions and everything should be sweet.
- Page 10 SO FAR HAS LED TO THIS MOMENT WE HAVE FAITH THAT YOU CARRIED OUT YOUR TASK SPLENDIDLY. BUT, IN CASE YOU NEED A LITTLE HELP, PLEASE CONTACT OUR DSL TECHNICAL SUPPORT AT 1300 739 407 OR VISIT OPTUS.COM.AU/HELPME OPTUS16716/1402301 (10/13)