Sharp XV-C100U Service Manual page 12

XV-C100U
2. Removing the PWBs
2-1. Slide out the power unit, ballast unit, main unit in their directions of arrow. Disconnect the connectors.
2-2. Remove the three screws, peel off the two pieces of tape, and take out the operation key unit.
2-3. Remove the screws off the control unit and R/C Receiver unit and sub unit. Disconnect the connectors.
2-4. Remove the button cover.
3. Removing the LCD module unit
3-1. Remove the screw off the panel cover. Take out the panel cover.
3-2. Pull up the LCD module unit slowly out of position.
2-3
3-1
Panel Cover
3-2
LCD
Module Unit
R/C Receiver
2-3
Unit
Operation Key Unit
Control Unit
Ballast Unit
2-1
12
2-2
2-4
2-1
Power Unit
Main Unit
2-3
2-1
Top Cabinet
Sub Unit Cover
2-3
Sub Unit