5
Press SYSTEM MENU.
The system menu turns off.
6
When you set "RF CHANGE" to "OFF,"
select the ID so that sound
transmission is most stabilized
(page 85).
Note
• When the wireless transmitter is not inserted in the
unit, you cannot set "RF CHANGE."
• In most cases, you will not need to change this
setting.
• If "RF CHANGE" is set to "OFF," transmission
between the unit and S-AIR sub unit can be
performed using one of the following channels.
– S-AIR ID A: equivalent channel for Wi-Fi
channel 1
– S-AIR ID B: equivalent channel for Wi-Fi
channel 6
– S-AIR ID C: equivalent channel for Wi-Fi
channel 11
• The transmission may be improved by changing the
transmission channel (frequency) of the other
wireless system(s). For details, refer to the operating
instructions of the other wireless system(s).
89
GB