Sony DAV-DZ265K Operating Instructions Manual page 87

• "ON": You can enjoy the S-AIR receiver
while the unit is in standby mode or turned
on.
• "OFF": You cannot enjoy the S-AIR
receiver while the unit is in standby mode.
The default setting differs depending on the
model.
4
Press .
The setting is made.
5
Press SYSTEM MENU.
The system menu turns off.
Note
• When you set "S-AIR STBY" to "ON," the power
consumption during the standby mode increases.
• When you turn the system off while "S-AIR STBY"
is set to "ON," "S-AIR" flashes (when sound
transmission between the unit and S-AIR receiver is
not established), or lights up (when sound
transmission between the unit and S-AIR receiver is
established) in the front panel display.
• If you turn the system off with the disc tray opened
while "S-AIR STBY" is set to "ON," the disc tray
may not close automatically.
• When the wireless transmitter is not inserted in the
unit, you cannot set "S-AIR STBY."
• "S-AIR STBY" is set to "OFF" automatically when
the wireless transmitter is removed from the unit.
Identifying the unit with a
specific S-AIR sub unit
(Pairing operation)
For the surround amplifier
For the S-AIR receiver
It is easy to set the same ID for the unit and an
S-AIR sub unit, such as a surround amplifier or
S-AIR receiver, to establish sound transmission.
However, neighbors may also receive your
system's sound if IDs are the same, or you may
receive the sound from neighbors. To prevent
this, you can identify the unit with a specific
S-AIR sub unit by performing the pairing
operation.
x Before pairing
Sound transmission is established by the ID
(example).
Your room
This unit
ID A
ID A
S-AIR sub unit
x After pairing
Sound transmission is established between the
paired unit and S-AIR sub unit(s) only.
Your room
This unit
ID A
ID A
S-AIR sub unit
Pairing
To perform pairing
1
Place the S-AIR sub unit that you want
to pair near the unit.
Note
• Remove headphones from the surround
amplifier (if connected).
2
Match the IDs of the unit and the S-AIR
sub unit.
• To set the ID of the unit, see "To set the ID
of the unit" (page 85).
• To set the ID of the S-AIR sub unit, refer
to the operating instructions of the S-AIR
sub unit.
Neighbor
ID A
S-AIR sub unit
Neighbor
No transmission
ID A
S-AIR sub unit
87
GB