Selecting A Time Zone; Swapping Your Current Location Time And World Time; Measuring Elapsed Time - Casio 5454 Operation Manual

Selecting a Time Zone

Use the procedure in this section to select a
World Time city (time zone). If you are in an
area that observes summer time, you can also
enable or disable summer time.
Note
The initial factory default summer
●
time setting for all cities (time zones)
is "AT (AUTO)". In many cases, the
"AT (AUTO)" setting lets you use the
watch without switching between
summer time and standard time.
1.
Pull out the crown to the first click.
The hands of the watch will move to the
current time in the currently selected
World Time City.
Small 24-hour hand
Time zone
Small hour hand
Small minute hand
The mode hand indicates the acquisition
status for the currently selected World
Time location.
"P": Available
"N": Not available
2.
Rotate the crown to change the time zone.
The small hour hand and small minute
hand indicate the current time in the
selected time zone.
Hold down (B) for about one second to
●
display UTC (Coordinated Universal
Time) time.
World Time hour (24-hour)
World Time hour and minute
Operation Guide 5454
3.
Press (A) to change the summer time
setting.
While the mode hand is pointed at "AT
●
(AUTO)", "STD", or "DST", you can hold
down (A) for about one second to cycle
the summer time setting in the
sequence below.
"AT (AUTO)"n"STD"n"DST"
"AT (AUTO)"
●
The watch switches between standard
time and summer time automatically.
"STD"
●
The watch always indicates standard
time.
"DST"
●
The watch always indicates summer
Mode time.
hand
4.
Push the crown back in.
Note
Crown
You cannot switch between "STD"
●
and "DST" while "UTC" is selected
as the Home City (time zone).
Swapping Your Current
Location Time and World
Time
Holding down (A) for about three seconds will
swap your current location time with your
World Time.
Before swapping
Current location time
Crown
World Time
If a swapping operation causes a change in
●
the day indicator setting, the mode hand will
rotate repeatedly.
Changing Hand and the Day Indicator
l
Settings
After swapping
World Time
n
Current location time
Stopwatch
The stopwatch measures elapsed time in units
of one second up to 23 hours, 59 minutes, 59
seconds (24 hours).
Getting ready
Enter the Stopwatch Mode.
Navigating Between Modes
l

Measuring Elapsed Time

Hour (24-hour time)
Minutes Hours
1.
Use the operations below to measure
elapsed time.
A
Start
A
Stop
A
Resume
A
Stop
2.
Press (B) to reset the stopwatch.
3.
Press (C) once to return to the
Timekeeping Mode.
Seconds
8