Recommended - Through Wall With Vertical Rise And Horizontal Termination Installation; Through Concrete Wall With Vertical Rise Installations - Vistaflame VF 170 Technical Manual

RECOMMENDED - T
A 45° down elbow may be used in place of the
termination cap (or stainless steel termination
hood).
T C W
HROUGH ONCRETE
Installation to use if there is a concrete or
retaining wall in line with exhaust vent on
pellet stove.
A 45° down elbow may be used in place of the
termination cap (or stainless steel termination
hood).
The termination must be 12 inches (30 cm)
from the outside wall and 12 inches (30 cm)
above the ground.
Installation
W W V
HROUGH ALL ITH
W V R
ALL ITH ERTICAL
R H
ERTICAL ISE AND ORIZONTAL
Termination cap
90°elbow
Wall framing
Vertical section
of vent pipe
Figure 13: Venting horizontally with rise.
I :
ISE NSTALLATIONS
Horizontal frame
for thimble
Wall thimble
90 elbow
o
Wall framing
Vertical section
of vent pipe
Figure 14: Venting with concrete wall behind unit .
T I
ERMINATION NSTALLATION
Wall strap
Horizontal
frame for
thimble
Clean
out tee
Wall thimble
Termination cap
Concrete Wall
Clean out tee
:
13