10 Operating Instructions and Installation
10-2-1 Installing Stand Kit (sold separately)
1. A 'Cover-Protector' is used to protect the hole at the bottom of the monitor, where the stand is inserted.
Be sure to remove the 'Cover-Protector' when attaching the provided Semi Stand or stand kit (sold sepa
rately) and cover the hole using the 'Cover-Hole' when attaching the wall mount kit.
2. Make sure you put the parts in the right direction and in the right place. (M4
3. Put the stand into the hole at the bottom of the monitor.
4. Insert screw into the hole indicated and tighten. (M4
10-10
L15)
L15)