Alignment And Adjustments; Service Mode - Samsung 400Txn Service Manual

3 Alignment and Adjustments

3-1 Service Mode

3-1-1 Entering the Factory menu on the Main board
- Power OFF -> INFO -> MENU -> MUTE -> Power ON
-When use the Factory remote control : INFO + Factory
3-1-2 Network Board Reset
- Check the BAT2400 battery status
- Move the jumper of the CN2400 connector in the following order:
Pin 1,2 -> Pin 2,3 -> Pin 1,2
3 2 1
3. Alignment and Adjustments
(using REMOCON)
3-1