Advertisement
Hardware Integration Pocket (HIP) installation option
To use the Hardware Integration Pocket (HIP) installation option, complete the following steps:
1.
Power off the print device.
2.
Locate the HIP 1. Remove the cover by using a thin, flat-blade screwdriver along either short edge to
gently pry the cover off.
With the HIP cover removed, a Type-B USB socket is visible:
3.
Select the appropriate HIP 1 USB cable and HIP 1 cover — dark or light color — to match the printer.
2
HP Multi-Protocol Proximity Card Reader CZ208A Installation Instructions
Advertisement
