Screen - Sony KLV-40NX520 Operating Instructions Manual

Screen

Wide Mode
Auto Wide
4:3 Default
Auto Display Area
Display Area
Horizontal Shift
Vertical Shift
PC Settings
For details about wide mode, see page 13.
Automatically changes the wide mode according to the input signal from an external
equipment. To keep your setting, select "Off".
• "Auto Wide" is only available when watching programmes from video input, HDMI and
component input in format 480i or 576i.
z • Even if "Auto Wide" is set to "On" or "Off", you can always modify the format of the
screen by pressing
Selects the default screen mode for use with 4:3 broadcasts.
"Wide Zoom": Enlarges the 4:3 picture to fill the 16:9 screen, keeping the original image as
much as possible.
"Normal": Displays conventional 4:3 broadcasts in the correct proportions.
"Off": Keeps the current "Wide Mode" setting when the channel or input is changed.
"On": Automatically adjusts the display area based upon the content.
"Off": Turns off the "Auto Display Area". Choose one from the "Display Area" options.
Adjusts the picture display area.
"Full Pixel": Displays the picture for 1080/50i, 1080/60i, 1080/50p and 1080/60p
sources (HDMI or component input only) or 1080/24p sources (HDMI input only) in
the original size. (Available depending on the TV model.)
"+1": Displays pictures in their original size.
"Normal": Displays pictures in their recommended size.
"-1": Enlarges the picture so that the edges are outside the visible display area.
Adjusts the horizontal position of the picture when "Wide Mode" is set to "Wide Zoom"
or "Zoom".
Adjusts the vertical position of the picture when "Wide Mode" is set to "Wide Zoom"
or "Zoom".
"Wide Mode"
Selects a screen mode for displaying input from your PC, see page 13.
"Reset"
Resets all the "PC Settings" except "Wide Mode" to the factory settings.
"Auto Adjustment"
Automatically adjusts the display position, phase and pitch of the picture when the TV
receives an input signal from the connected PC.
z • "Auto Adjustment" may not work well with certain input signals. In such cases, manually
adjust "Phase", "Pitch", "Horizontal Shift" and "Vertical Shift".
"Phase"
Adjusts the phase when the screen flickers.
"Pitch"
Adjusts the pitch when the picture has unwanted vertical stripes.
"Horizontal Shift"
Adjusts the horizontal position of the picture.
"Vertical Shift"
Adjusts the vertical position of the picture.
repeatedly.
Continued
27
GB