Sony KLV-40NX520 Operating Instructions Manual page 26

Surround
Bass Booster
Dual Sound
Speakers
Audio Out
Headphone Speaker
Link
Headphone Volume
HDMI/DVI Audio
Source
26
GB
Allows you to select the suitable surround effects depending on the genre of TV
programme (movie, sport, music, etc.) or video game.
The options that can be selected differ depending on the "Scene Select" settings.
"On": Delivers surround effects that help you enjoy the virtual two-ch surround audio
with just the two internal TV speakers.
"Simulated Stereo": Adds a surround-like effect to mono programmes.
"Cinema": Delivers surround effects just like the high-grade audio systems found in
movie theatres.
"Music": Delivers surround effects that make you feel like you are surrounded by sound
as in a music hall.
"Sports": Delivers surround effects that make you feel like you are watching a live
sports contest.
"Game": Delivers surround effects that enhance game sound.
"Off": Converts and reproduces multi-ch audio to 2ch audio. In the case of other audio
formats, the original audio is reproduced.
Produces a fuller sound for more impact, by emphasising the bass sounds.
Sets the sound from the speaker for a stereo or bilingual broadcast.
"Stereo"/"Mono": For stereo broadcasts.
"Main"/"Sub"/"Mono": For bilingual broadcasts, select "Main" for sound channel 1,
"Sub" for sound channel 2, or "Mono" for mono channel, if available.
• If the signal is very weak, the sound becomes monaural automatically.
• If the stereo sound is noisy when receiving a NICAM programme, select "Mono". The
sound becomes monaural, but the noise is reduced.
• The "Dual Sound" setting is memorized for each programme position.
• You cannot listen to stereo broadcast sound when "Mono" is selected.
z • If you select other equipment connected to the TV, set "Dual Sound" to "Stereo", "Main"
or "Sub". However, when the external equipment connected to the HDMI jack (except
HDMI 1) is selected, this is fixed to "Stereo".
• If you access to FM Radio mode, set "Dual Sound" to "Stereo" or "Mono".
"TV Speakers": Turns on and outputs the TV's sound from the TV speakers.
"Audio System": Turns off the TV speakers and outputs the TV's sound from external
audio equipment connected to the audio output jacks on the TV.
You can also turn on the connected equipment that is compatible with Control for
HDMI, after making the appropriate settings of Control for HDMI.
"Variable": When using an external audio system, volume output from audio out can
be controlled using the TV's remote.
"Fixed": The audio output of the TV is fixed. Use your audio receiver's volume control
to adjust the volume (and other audio settings) through your audio system.
Switches the TV's internal speakers on/off when you connect headphones to the TV.
Adjusts the volume of the headphones.
Switches the audio signal for HDMI input when a DVI device is connected. Select from
"Auto", "HDMI Audio" and "PC Audio".