GMC 2016 Sierra Owner's Manual page 225

224 Infotainment System
5. Locate the device named Your
Vehicle in the list on the cell
phone. Follow the instructions
on the cell phone to enter the
PIN provided in Step 3. The
system may respond with a six
digit code to be confirmed on
the cell phone (instead of
entering a four digit code),
check that the same digits are
shown on the cell phone and
say "Yes" to confirm. Select
Confirm on the cell phone as
well. After the PIN is
successfully entered, the
system prompts you to provide
a name for the paired cell
phone. This name will be used
to indicate which phones are
paired and connected to the
vehicle. The system responds
with <Phone name> has been
successfully paired after the
pairing process is complete.
6. Repeat Steps 1 5 to pair
additional phones.
Listing All Paired and Connected
Phones
The system can list all cell phones
paired to it. If a paired cell phone is
also connected to the vehicle, the
system responds with is connected
after that phone name.
1. Press . The system responds
Ready, followed by a tone.
2. Say Bluetooth.
3. Say List.
Deleting a Paired Phone
If the phone name to delete is
unknown, see Listing All Paired
and Connected Phones.
1. Press . The system responds
Ready, followed by a tone.
2. Say Bluetooth.
3. Say Delete. The system asks
for which phone to delete.
4. Say the name of the phone to
delete.
Connecting to a Different Phone
To connect to a different cell phone,
the Bluetooth system looks for the
next available cell phone in the
order in which all available cell
phones were paired. This may need
to be repeated depending on how
many cell phones have been
connected.
1. Press . The system responds
Ready, followed by a tone.
2. Say Bluetooth.
3. Say Change phone.
If another cell phone is
found, the response will be
<Phone name> is now
connected.
This can be repeated to
connect any of the up to
five paired phones.
If another cell phone is not
found, the original phone
remains connected.