Step 3: Connecting your computer
Connect your computer to one of the Ethernet LAN ports
on the Hybrid Live!, using an Ethernet cable with a RJ-45
connector. Your provider can tell you which ports to use.
Note: refer to section "fixed network setup" if your connection
is not working directly from the start.
Step 4: Connecting your telephone
This step is only relevant if the Hybrid Live! has voice ports.
A standard analog telephone handset can be connected to the
active voice ports, using a RJ-11 cable. The
if voice is enabled and operating correctly. Your provider can
tell you which ports to use.
Reference image of
the back of a PC
LED indicates
5