Standby - Miele t 8302 Operating Instructions Manual

Standby

To save energy, the programme
sequence/check lamps go out and
the indicator lamp for the Start button
starts flashing slowly.
To come out of standby mode
^ Turn the programme selector or
press the Start button. Neither will
have any effect if a programme is
running.
On
The standby function is activated and
the programme sequence/check lamps
will go out after 10 minutes:
– if a programme is not selected after
the dryer has been switched on.
– after a programme has started.
They will, however, come on for 10
minutes at the end of the programme or
the end of the anti-crease phase. The
buzzer (if selected ) will sound for 10
minutes at the end of the programme.
Programmable functions
Factory default. Not in current
programme
As described under "On" above.
However, they will stay on after the
programme has started and remain
visible during the programme.
Off
The programme sequence/check
lamps will stay on while the dryer is
switched on.
Follow the steps (A,B,C ...) to
programme and store in memory.
^ See next page.
49