Epson S50675 Quick Reference Manual page 40

| Replacing the Wiper, Wiper Cleaner, and Flushing Pad
38
Remove the flushing pad by grasping its tab, and place it on the metal tray.
6.
Caution: Hold the flushing pad upright and level as you remove it to prevent ink from spilling. Be careful not
to let ink spill onto any part of the printer.
Insert the two hooks on the new flushing pad into the slots as shown, and press the tab down until the
7.
pad clicks into place.
Close the right maintenance cover.
8.
Press , then press
OK
9.
again.
OK