Disabling/Enabling Message Key Flashing; List Entry; Calls List - Gigaset a400 Instruction Manual

Disabling/enabling message key flashing

You can select whether the message key
(default setting) or does not flash when new mes-
sages arrive. Please do the following:
¤ Press the key sequence:
P#Q5#M
Menu ¤
The following is displayed:
97
¤ Press one of the following keys to select the mes-
sage type:
5
for missed calls
M
or for messages on the answering
machine (Gigaset A400A only)/net-
work mailbox
Your selection is displayed (e.g. 5 for missed calls);
the current setting flashes:
975 SET: [ 0 ]
Q 1
¤ Press key
or
messages:
Q
message key flashes (it stops when the
key is pressed)
1
or message key does not flash
Your selection is displayed (e.g. 1):
975 SET: [ 1 ]
¤ Press the display key
Call list
Prerequisite: CLIP (¢ page 8)
Depending on the type of list set, the call list contains
(¢ page 24)
u Accepted calls
u Missed calls
u Calls recorded by the answering machine (A400A
only)
Depending on the type of list set, all numbers of the
last 25 incoming calls are saved or just the missed
calls are saved.
The call list is displayed as follows:

Calls List:

01+02
Number of new entries + number of old, read entries.
Opening the calls list
f
¤ Calls List: 01+02 ¤ OK
The last incoming call is displayed.
q
If necessary, use to select another entry.
f
flashes
, to set the behavior for new
.
OK
10

List entry

Example of list entries:
New Call
1234567890
28.06.11 08:34
W
Back Menu
u Status of entry
– New Call: new missed call.
– Old Call: entry already read.
– Call recv.: call accepted.
– Answer M (Gigaset A400A): the answering
machine accepted the call. A message was left.
u Entry number
u Number or name of caller
u Call date and time (if set, ¢ page 7).
c
Press the talk key
Using other functions
q
(Select entry) ¤ Menu
The following functions can be selected with
Delete Entry Delete current entry.
Copy to Copy an entry to the directory.
Directory
Delete List Warning! All old and new entries
will be deleted.
Answering machine list (A400A only)
You can use the answering machine list to listen to
the messages that are on the answering machine.
The answering machine list is displayed as follows:
Answ. Mach.:
01+02
Number of new messages + number of old, played back mes-
sages
Opening the voicemail list
f
¤ Answ. Mach.: 01+02 ¤ OK
If you have new messages, playback will start with the
first new message, otherwise with the first old mes-
sage.
Using other functions
During message playback:
Press the Menu display key, playback stops.
The following functions can be selected with
Dial Number Call back a caller.
Continue Resume paused playback.
Volume Set the volume.
Copy to Copy an entry to the directory.
Directory
Delete all Delete all old messages.
02
to call the selected caller back.
s
:
s
: