JVC KD-X310BT Instruction Manual page 25

Symptom Remedy
Station cannot be If "Explicit Content" in [Account Settings] is checked in
selected. the web version of iHeartRADIO, custom stations become
unavailable.
"CREATE ERR" Custom station name creation is unsuccessful.
"SAVE ERROR" Addition to the favorite category failed.
"DISCONNCTED" Check the connection to the device.
"NO SKIPS" The skip limit has been reached. Retry later.
"NO STATIONS" No stations are found.
"NOT CONNCTD" Link to the application is impossible.
"UPDATE APP" Make sure you have installed the latest version of the iHeart
Link for JVC application on your device.
"PLS LOGIN" You haven't log in. Log in again.
"STATION NOT Broadcast from the station is over.
AVAILABLE"
"STATION NOT No station is selected.
SELECTED"
"STREAM ERR" Broadcast data is interrupted.
"THUMBS ERR" Registration of Thumbs Up/Down has failed.
"TIMED OUT" The request has resulted in time-out.
Symptom Remedy
"CH LOCKED" The selected channel is locked. Enter the correct pass code to
unlock. ( 12)
"CHAN UNSUB" The selected channel is unsubscribed.
Call 1-866-635-2349 or 1-877-438-9677 to subscribe.
"CH UNAVAIL" The selected channel is unavailable.
"CHK ANTENNA" Check the antenna and its connection are in good condition.
"CHECK TUNER" Make sure the SiriusXM Vehicle Tuner is connected to the
unit.
"NO SIGNAL" Make sure the antenna is mounted outside the vehicle.
"SUBSCRIPTN UPDATED Your subscription is updated. Press the volume knob to
– ENTER TO CONTINUE" continue.
"WRONG CODE" Make sure you have entered the correct pass code. ( 12)
No Bluetooth device is • Search from the Bluetooth device again.
detected. • Reset the unit. ( 3)
Pairing cannot be • Make sure you have entered the same PIN code to both the
made. unit and Bluetooth device.
• Delete pairing information from both the unit and the
Bluetooth device, then perform pairing again. ( 13)
"PAIRING FULL" The number of registered devices has reached its limit. Retry
appears. after deleting an unnecessary device. ( 17, DELETE PAIR)
"PLEASE WAIT" The unit is preparing to use the Bluetooth function. If the
appears. message does not disappear, turn off and turn on the unit,
then connect the device again.
TROUBLESHOOTING
ENGLISH | 23