Kenmore 153.582400 Use & Care Manual page 27

E09
with an alert Icon flashing.
E10
E11
E12
E51
with an alert Icon flashing.
E52
with an alert Icon flashing.
E71
with an alert Icon flashing.
* These instructions are brief and are intended as guidance for a qualifi ed service technician. If you lack the skills that are necessary
to perform these procedures, call the Sears Service Center for assistance (1-844-553-6667).
Electronic Thermostat (ET) error.
A failure to communicate with the Electronic
Thermostat (ET).
Energy Saver Module (ESM) is receiving the
wrong data from the Electronic Thermostat
(ET).
Energy Saver Module (ESM) thermistor
failure.
1. Turn off electrical power.
2. Check wiring at Electronic Thermostat (ET) for damage.
3. Turn on electrical power at breaker.
4. If this code flashes condition continues, replace the Electronic
Thermostat (ET).
1. Turn off electrical power at the breaker, check all electrical con-
nections,
and wiring for damage.
2. Replace the Electronic Thermostat (ET).
3. Turn on electrical power at breaker.
1. Turn off electrical power at the breaker, check all electrical con-
nections,
and wiring for damage.
2. Replace the Energy Saver Module (ESM), if this does not correct
the problem, also replace Electronic Thermostat (ET).
1. Turn off electrical power at the breaker, check all electrical con-
nections,
and wiring for damage.
2. Turn on electrical power at breaker.
3. If error returns call service technician for assistance.
27