Measurements With A Tripod; Measuring Long Distances; Working With The “Bosch Dle 150” Software; Indication Elements Of The Software On A Pda - Bosch DLE 150 Connect Operating Instructions Manual

Measurements with a Tripod

Measurements with a tripod are especially necessary for long distances.
The unit can be screwed onto a camera tripod with the 1/4" threads 20
on the underside of the housing.

Also with the use of a tripod, the unit measures from its rear
end and not from the middle of the threads.
The distance from the threads 20 to the rear edge of the unit is 45 mm
with the compact end piece 17 and 70 mm with the universal end piece
18.

Measuring Long Distances

For the measurement of longer distances (>30 m), the use of the optical
sight ZO 4 30 and a tripod (accessory) is recommended. With the optical
sight, the target area is shown enlarged four times and the visibility of the
laser point is improved by a swing-in filter.
Working with the "BOSCH DLE 150" Software
General
Independent of the measuring function selected on the DLE 150 Connect,
individual measured values are transmitted wirelessly. Values calculated
by the DLE 150 Connect (e.g. volume in m
transmitted. Calculations on the basis of the transferred individual meas-
ured values are possible, however, with the aid of the applications on the
PC or PDA.
The last transferred measured value is displayed in each case by the
"BOSCH DLE 150" software. In an opened application software on the
PC or PDA (e.g. Microsoft
same time at a desired location (see Inserting Measured Values in an Ap-
plication Software).

Indication Elements of the Software on a PDA

Online Help of the Software
The operating instructions can also be called up by means of the Online
Help of the "BOSCH DLE 150" software.
1 609 929 F53 • (04.07) T
®
Excel), this measured value is entered at the
Status symbol
Status indicator of the wireless
connection
Serial number of the connected
DLE 150 Connect
Last transferred measured value
Menu bar
To use the Online Help, select the "Help"
menu item in the "Help" menu on the menu
bar.
English–9
3
) or stored values cannot be