Extension Ducts - Fitting - IDEAL Response FF80 Installation And Servicing

INSTALLATION
30 FLUE EXTENSION DUCT PACK D CONTENTS
Use a maximum of 2 extension ducts only.
31 ASSEMBLING THE EXTENDED FLUE
26
1. Remove the cardboard support aid from the
flue and place safely to one side.
2. Fit the flue extension connector from Pack D
on to the standard flue duct.
3. Drill three 3.2mm ( ") dia. equally spaced
1/8
holes through the flue connector and the
outer flue duct. Do not drill the inner flue
duct.
4. Insert the self tapping screws provided, to fix
the connector in position.
5. Fit the inner flue extension duct into the
connector.
6. Fit the outer flue extension duct into the
connector.
7. Drill three 3.2mm ( ") dia equally spaced
1/8
holes through the flue connector and the
outer flue extension duct. Do not drill the
inner flue duct.
8. Insert the self tapping screws provided, to fix
the connector in position.
9. Repeat steps 1 - 8 if a second flue extension
is required.
Response FF80
- Installation