Other Features; Set The Alarm Timer; Set Sleep Timer; Listen To External Audio Device - Philips DCM3160 User Manual

7 Other features

Set the alarm timer

DCM3160 can be used as an alarm clock. You
can select the disc, iPod/iPhone library, FM radio
station, or .mp3 files stored on a USB storage
device as alarm source.
Note
•
Make sure that you have set the clock correctly.
•
If the selected alarm source is unavailable, DCM3160
switches to FM mode automatically.
1
In normal standby mode, press and hold
SLEEP/TIMER for two seconds.
» [SET TIMER] is displayed.
2
Press / to select an alarm source
(DISC, TUNER, USB, or Dock), and then
press SLEEP/TIMER to confirm.
» The hour digits blink.
3
Press / repeatedly to set the hour,
and then press SLEEP/TIMER to confirm.
» The minute digits blink.
4
Press / to set the minute, and then
press SLEEP/TIMER to confirm.
» VOL_XX (XX indicates the volume
level of alarm) blinks.
5
Press / to set the alarm volume,
and then press SLEEP/TIMER to confirm.
Stop an alarm
When an alarm rings, press
another mode to stop it.
Note
•
If you do not stop an alarm, it keeps ringing for 30
minutes, and then DCM3160 automatically switches to
normal standby mode.
Activate/deactivate alarm timer
In standby mode, press SLEEP/TIMER
repeatedly to activate or deactivate timer.
» If timer is activated,

Set sleep timer

When DCM3160 is turned on, press
SLEEP/TIMER repeatedly to select a time
period (in minutes).
» When sleep timer is activated,
displayed.
» To deactivate sleep timer, press
SLEEP/TIMER again until [SLEEP OFF]
appears.
Listen to external audio
device
You can listen to an external audio device such
as MP3 player through DCM3160.
1
Connect an audio input cable with 3.5 mm
plug on both ends between
• the AUDIO IN socket on the back
panel of this product, and
• the headphone socket on the external
device.
2
Press USB/AUDIO IN repeatedly to
switch to the AUDIO IN source.
or switch to
is displayed.
is
EN 15