Dpl); Programming Rx (Reception) Bandwidth - Motorola XTNID User Manual

MENU to scroll through the options until you
reach the 'Code Programming Mode'. The
radio display will show the blinking CTCSS/
DPL code as follows:.
R
To program the desired code, scroll up/down
with the /
CTCSS/DPL code value you want to set up.
Long press the PTT button to exit and save.
PROGRAMMING RX (RECEPTION)
BANDWIDTH
Some frequencies have selectable channel
spacing, which must match other radios for
optimum audio quality.
Once you have chosen the channel you want
to program, short press the PTT button or
40
English
X
buttons until you get the
MENU to scroll through the options until you
reach the 'Bandwidth Programming Mode'.
The radio display will show the current
bandwidth setting as follows:
R
BW
X
To program the desired bandwidth (HI =
25Khz, LOW = 12.5 Khz), use the
buttons until to select the value. Long press the
PTT button to exit and save or short press the
PTT button to move to the next programming
feature without saving.
Note: If the value of the bandwidth cannot be
changed, the display setting remain solid.
/