Table of Contents
Advertisement
Spray Arms
Particles of food can get stuck in the spray arm jets and
bearings. The spray arms should be checked and cleaned
regularly.
1. Ensure the dishwasher is switched off.
2. Check whether or not the holes for the upper and lower
spray arms are clogged. If there is any clogging, remove
the spray arms and clean them under running water.
3. You can remove the lower spray arm by pulling it
upwards, while the upper spray arm nut can be removed
by turning the nut to the left.
4. Be sure that the nut is perfectly tightened when refitting
the upper spray arm.
Frost Precaution
Avoid placing the dishwasher in a location where the temperature is below 0°C. If your appliance is left in
an unheated place over the winter, you are advised to:
1. Disconnect the unit from the water inlet.
2. Turn on the unit. Select any washing cycle and let it run for 1 minute only. This will allow all the
excessive water that remains in the unit to drain out.
3. Disconnect from the mains.
4. Empty the dishwasher.
5. Close the dishwasher's door.
6. Disconnect the unit from the water drain. Use a suitable receptacle to catch any residual water in the
pipes.
Should you encounter any difficulties with the above steps, please ask a service technician for assistance.
Moving the Dishwasher
If you have to move the unit, for instance due to moving house, you are advised to:
1. Disconnect the dishwasher from the mains.
2. Disconnect the unit from the water inlet and drain. Use a suitable receptacle to catch the water.
3. Remove the unit from the current location with the hoses discharged.
4. Pull the unit out together with the hoses.
• Avoid over tilting the unit during transportation.
• We recommend that 2 people handle the dishwasher during installation.
* Images are for reference only. Please refer to your individual model for details.
28
Hide quick links:
Advertisement
Table of Contents
