Introduction; General Instructions - Immergas CRD Instruction Booklet

INTRODUCTION

The "Immergas" programmable "Digital
Remote Control" (hereinafter CRD) is
designed to guarantee ideal temperature
conditions at any time of the day and night
for every single day of the week.
Installation takes just a few minutes: in fact
it is connected to the boiler with only 2 wires
through which it is powered and receives and
sends adjustment and control commands.
After installation it is ready to use, thanks
to the preset program inside. The customer
can modify the basic program according
to needs.
The CRD is extremely easy to program and
a large display allows all the settings to be
constantly checked.
4

GENERAL INSTRUCTIONS

This manual has been prepared for: the
Installer and the User.
• Read this document carefully as it pro-
vides the technical characteristics and
instructions on installation, assembly,
programming, adjustment and correct
use of the CRD.
• Execution of the system must comply
with current CEI regulations.
• The instruction manual must be consid-
ered a part of the CRD and "kept for
future reference".
• After unpacking, check the good condition
of the CRD. In case of doubt do not use it,
and contact the Dealer or Manufacturer.