Room Temperature Temporary Change - Immergas CRD Instruction Booklet

In case of difficulty, the factory settings
can be restored by pressing the buttons
and in sequence and keeping them
pressed until the message "CLEAR" flashes
on the display.
NOTE
All adjustment personalisations made to
the programs and temperatures by the
user are stored, even in case of a power
failure.
22
6.4 Room temperature temporary
change
The set room temperature can be tempo-
rarily varied during automatic operation
mode (detail A fig. 11).
Press the buttons
the room temperature value; the display
shows the symbol
perature value flashing. (detail B fig. 11)
After selecting the value press
If the value is not confirmed after a certain
period the CRD will automatically acquire
the selected value and the normal display
will return with the symbol
(detail C fig. 11).
and to set
and with the tem-
to store.
flashing