Automatic Operation With Preset Program - Immergas CRD Instruction Booklet

6.2 Automatic operation with preset
program
The CRD contains a standard program for
room temperature management during
the hours and days of the week, making
its use easier.
To use this program, whose description is
given in the table (fig. 8), press the but-
ton until the symbol
the display.
At this point the CRD is active and operat-
ing with the standard program described
in the following table.
18
Days
Mon - Fri
(Day 1 - 5)
Sat - Sun
(Day 6 -7)
appears on
NOTE
To change the preset working tempera-
tures, follow the indications given in the
next paragraph.
16°C
from 23:00 to 6:00 from 6:00 to 8:00
from 8:00 to 11:00 from 11:00 to 13:00
from 13:00 to 17:00 from 17:00 to 23:00
from 23:00 to 7:00 from 7:00 to 23:00
20°C
Fig. 8