EXPLANATION:
1
If the power switch is not on, the camera's shutter, rangefinder
and flash will not operate. Push the switch to "1" to turn on the
power.
2
If the power switch is on and the camera still doesn't operate, try
another 6 volt battery.
3
If the camera still doesn't operate, check the cable linking the 6
volt battery. Do this by disconnecting the 6 volt battery and
installing four 1.5 volt AA batteries in the hand grip, making sure
they are properly orientated. If the camera works, the cable is
defective and should be replaced.
4
If the camera still doesn't operate, it is probably defective and
should be replaced.
16