Polaris 2016 GEM e2 Owner's Manual page 61

FEATURES AND CONTROLS
Park Brake Lever
WARNING! A rolling vehicle can cause serious injury. Always
set the park brake when leaving the vehicle unattended.
Remove the key from the ignition to prevent unauthorized use.
If the key is turned off without setting the park brake, an
alert will sound. Set the park brake to end the alert.
When the park brake is set and the brake indicator is
illuminated, the vehicle will not move.
Always apply the brakes before setting or releasing the
park brake. To set the park brake, pull the park brake
Park Brake
Park Brake
lever slightly upward and toward the center of the
Lever
Release
vehicle. To release the park brake, press and hold the park
brake release and move the lever to the disengaged position.
NOTICE: Be sure the park brake is fully disengaged before driving. Failure to do so can lead to
overheating of the rear brakes.
NOTE:
The park brake is adjustable and should be checked periodically as outlined in the Periodic
Maintenance Chart beginning on page 98. Your authorized dealer can assist.
59