Polaris 2016 GEM e2 Owner's Manual page 55

FEATURES AND CONTROLS
Main Power Connector
When the main power connector is unplugged, the battery pack is disconnected from all
electrical components, with the exception of the contactor. After servicing the vehicle, the
main power connector should be the last connection to be made.
Disconnecting Power
1. Position the vehicle on a dry, firm, level surface.
2. Set the park brake.
3. Turn the key off.
4. Remove the hood. See page 84.
NOTICE: Damage to electrical connections and components will occur if they are unplugged before
the main power connector is disconnected.
WARNING! Before servicing the vehicle's electrical system, always disconnect the main power
connector first, then disconnect any electrical accessory connections, then disconnect the negative
cable from the 12-volt battery (if equipped), then disconnect the negative terminal from the main battery
pack.
53