Sony Cyber-shot DSC-RX1RM2 Instruction Manual page 13

ZEISS lens
The camera is equipped with a ZEISS lens
which is capable of reproducing sharp
images with excellent contrast. The lens for
the camera has been produced under a
quality assurance system certified by
ZEISS in accordance with the quality
standards of ZEISS in Germany.
Notes on the monitor, electronic
viewfinder, lens, and image sensor
• The monitor and electronic viewfinder
are manufactured using extremely high-
precision technology, and over 99.99%
of the pixels are operational for effective
use. However, there may be some small
black dots and/or bright dots (white, red,
blue or green in color) that constantly
appear on the monitor and electronic
viewfinder. These dots are normal due to
the manufacturing process and do not
affect the images in any way.
• Do not hold the camera by the monitor or
the viewfinder.
• Take care that your finger is not in the
way when pushing the viewfinder down.
• If water, dust or sand adheres to the
viewfinder unit, it may cause a
malfunction.
• Do not expose the camera to sunlight or
shoot sunward for a long time. The
internal mechanism may be damaged.
• Do not use the camera in areas where
strong radio waves or radiation are being
emitted. Recording and playback may not
function correctly.
Notes on using your camera
• Magnets are attached to the camera body
and the back of the monitor. Do not put
objects that are affected by magnetic
fields, such as floppy disks or credit
cards, between the monitor and the
camera body.
• Images may trail across on the screen in a
cold location. This is not a malfunction.
When turning on the camera in a cold
location, the screen may become
temporarily dark. When the camera
warms up, the screen will function
normally.
• The recorded image may be different
from the image you monitored before
recording.
Notes on using accessories
It is recommended that you use Sony
accessories designed to suit the
characteristics of this camera. Using this
camera with products from other
manufacturers may affect its performance,
leading to accidents or malfunction. Sony
bears no responsibility for such accidents or
malfunction.
Notes on the multi interface shoe
• When attaching or detaching accessories
such as an external flash to the multi
interface shoe, first turn the power to
OFF. When attaching the accessories,
tighten the screws all the way and
confirm that it is firmly fastened to the
camera.
Magnets
Magnets
GB
13