Using The Start/Stop Function - Volvo XC90 Quick Manual

using tHe start/stop Function

this function pauses the engine temporarily when the car is stationary
and then starts it again automatically when the journey is resumed.
start/stop is activated every time the car is started.
Auto-stopping the engine
– stop the car using the brake pedal and keep your foot on the pedal.
the brake pedal can be released when the "automatic brake when
stationary" function (auto Hold) is activated. the tachometer in the
driver display indicates when the engine is stopped automat-
ically. if drive mode Comfort or Eco is activated, the engine can
stop automatically before the car is completely stationary.
Options for auto-starting the engine
– release the brake pedal. with auto Hold activated the accelerator
pedal must be depressed.
– on a slope: release the brake pedal and allow the car to roll. the
engine starts automatically after a slight increase in speed.
– when adaptive cruise control* or pilot assist* is activated depress
the accelerator pedal or press
steering wheel.
Deactivating the function
– press the Start/Stop
centre display.
the left-hand keypad on the
button in the function view in the
02