Samsung NE58H9950WS User Manual page 65

How to run a self-cleaning cycle
1. Select the length of time for the self-cleaning operation, eg. 3 hours.
Press SELF CLEAN once for a 3 hour clean time, twice for a 4 hour clean time, or 3 times for
a 5 hour clean time.
The default setting is 3 hours.
2. Start the self-cleaning cycle.
Press START SET. The motor-driven door lock will engage automatically.
3. When the self-cleaning cycle is done, End will show in the display and a beep will sound 6 times.
How to delay the start of self-cleaning
1. Press SELF CLEAN.
Select the desired self-clean time by pressing SELF CLEAN.
2. Press DELAY START.
3. Enter the time you want the clean cycle to start.
4. Press START SET.
The display will show delay start, self clean, and the Lock icon. The motor-driven door lock will
engage automatically.
5. The Self-Cleaning cycle will turn on automatically at the set time.
How to turn off the self-cleaning feature
You may find it necessary to stop or interrupt a self-cleaning cycle due to smoke in the oven.
1. Press OVEN OFF.
2. You will be able to open the oven door once the oven has cooled down for approximately
1 hour.
After a self-cleaning cycle
You may notice some white ash in the oven. Wipe it up with a damp cloth after the oven cools.
(If white spots remain, remove them with a soap-filled steel wool pad and rinse thoroughly with
a vinegar and water mixture.)
If the oven is not clean after one cycle, repeat the cycle.
You cannot set the oven for cooking until the oven is cool enough for the door to unlock.
Manual Users_NE58H9950WS_AA_AC_DG68-00531A-00_EN.indd 65
You will not be able to start a self-cleaning cycle if the control lockout feature is activated
or if the oven's temperature is too hot.
The oven door locks automatically. The display will show the cleaning time remaining.
It is not be possible to open the oven door until the temperature drops to a safe/cool
temperature.
The self-cleaning feature will not operate when the warming drawer is on.
English - 65
2014-02-11 2 59 33