Dell Vostro 5480 Owner's Manual page 36

SATA Operation
Adapter Warnings
Function Key Behavior
Battery Health
Miscellaneous Devices
Security
Table 4. Security
Set Asset Tag
Set Admin Password
Set System Password
Set HDD Password
Password Change
Password Bypass
Boot
Table 5. Boot
Boot Priority Order
Legacy Boot Option
Secure Boot
Add Boot Option
Delete Boot Option
Exit
This section allows you to save, discard, and load default settings before exiting from System Setup.
36
Change the SATA controller
mode to either ATA or AHCI.
Enable or disable the Adapter
Warnings.
Specifies the behavior of the
function key <Fn>.
Displays a message about the
battery health.
These fields let you enable or
disable various on-board devices.
This field displays your system's asset tag. If the
asset tag is not already set, this field can be used to
enter it.
Allows you to change or delete the administrator
password.
Allows you to change or delete the system
password.
Allows you to set a password on the computer's
internal hard drive (HDD).
Allows you to change the security password.
Allows you to bypass the system password and the
internal HDD password prompts during a system
restart/resume from hibernate state.
Specifies the order of different devices in which the
computer will boot through at start up.
Allows you to load legacy option. (Default:
Enabled)
Species if the UEFI secure boot option (Default:
Disabled)
Allows the user to add an additional boot device.
Allows the user to remove an existing boot device
from the boot order.
Default: AHCI
Default: Enable
Default: Function key