Installing The Heatsink; Removing The Memory Module - Dell Vostro 5480 Owner's Manual

Installing the Heatsink

1. Place the heatsink into its original position on the system board.
2. Tighten the screws to secure the heatsink to the system board.
3. Install:
a. system fan
b. battery
c. base cover
4. Follow the procedures in

Removing the Memory Module

1. Follow the procedures in
2. Remove:
a. base cover
b. battery
c. system fan
d. heatsink
3. Pry the retention clips away from the memory module until it pops up. Remove the memory module
from its connector on the system board.
After Working Inside Your computer
Before Working Inside Your Computer.
21